News & Events
Position:Home > Company NewsCompany News
SS-PREP Nitinol Prealloy Spherical Powder
Currently, Sino-Euro Tech. has prepared Nitinol prealloy spherical powder. Fig. 1 displays the properties and chemistry of Nitinol powder. As for 15-53μm powder, Hall flow speed with 2.5mm calibrated orifice is 18.3 s/50g , and apparent density is 3.92g/cm3. Morphology in Fig.2 shows high sphericity and few satellites. [MORE]
 
Meet Us at Shanghai TCT 2019
[MORE]
 
Sino-Euro Announces Receipt of AS9100D Certification for Space, Aviation, and Defense Industries
[MORE]
 
TiAl4822 prealloy spherical powder
Currently, Sino-Euro Tech. has prepared TiAl4822 prealloy spherical powder. Fig. 1 displays the properties and chemistry of TiAl4822 powder. As for 15-53μm powder, Hall flow speed with 2.5mm calibrated orifice is 33.5 s/50g (26 s/50g for 45-106μm), and apparent density is 2.35g/cm3. Morphology in Fig.2 shows high sphericity and few satellites. [MORE]
 
SMT Was Honored the 2017 “Excellent Investment Project” of Xi’an Economic and Technological Development Zone
The“Catching up”propulsion conference of Xi’an economic and technological development zone was held in BoFeiLang Hotel on 2nd March, 2018. SMT was honored the 2017“Excellent Investment Project”of Xi’an Economic and Technological Development Zone. [MORE]
 
Chinese New Year Greeting
[MORE]
 
SINCERE INVITATION from SINO-EURO
Sino-Euro has been focusing on Metal Additive Manufacturing Raw material, including powder and wire. Currently, there have been two Quality Management Systems AS9100 & ISO13485 in Sino-Euro to protect benefit of customers.Welcome to Xi’an China and our Booth in different shows. [MORE]
 
Spring Breezes, But Pales Before You
The 108 "International Women's Day" is coming in a warm sunny day with gentle wind. In order to show the special care for female colleagues, the leaders and labor union of SMT sent their greetings to all the female employees for their beautiful holiday. [MORE]
 
SMT Showed Successfully on the 2018 TCT Exhibition in Asia
The 2018 TCT 3D Printing Exhibition/Additive Manufacturing Exhibition was held in International Expo Center in Shanghai from 1st to 3rd of March, 2018. There were over 200 companies from home and aboard in areas of consumable materials, equipment and technology service. [MORE]
 
SMT has passed the trademark registration
Recently, the Sino-Euro Materials Technologies of Xi’an Company. Co.Ltd received the certificate of trademark registration approved and issued by the trademark office of the state administration for industry and commerce. [MORE]
 
首页 上一页 下一页 尾页 页次:1/2页  共17条记录 10条记录/页 转到: